1. Home
  2. Docs
  3. Technical Manual
  4. UPS and Cooling overhead

UPS and Cooling overhead

Rejoose includes predefined UPS loss and cooling overheads based on ‘The green grid maturity model’.

The default setting is “level 2 – Best practice” from the maturity model.

If you have knowledge about the cooling ad UPS installation, we recommend adjusting it. See the following tips:

  • Choose among predefined cooling overhead and UPS loss for your current and future installation.
  • If you have knowledge about the exact cooling overhead and UPS loss fill out custom values.
  • If UPS or Cooling is not directly affected/changes in your project, the overheads/losses should be the same level on current and future installation.
  • If there’s no UPS or cooling, set these to 0%.

When done, click ‘Save’ and ‘Continue’, which presents you for report options.